Ein einfaches und colles eHealth Projekt mit dem Calliope Mini. Super für den Bio- oder Sportunterricht oder einfach so zum Spaß.
Using magnets and arduino components to create a levitating, and self-propelling, magnetic train.
New Year 2018, Seeed held a big party, in order to attract everyone's attention at this party, I made a cool equipment -lightning fauntlet.
Shows how to use the Ubidots platform with the particle board by monitoring the temperature humidity and air quality of a room!
An electronic sun-dancing sun tracker.
Let's create a data logger on ThingSpeak.com using an ESP programmed with MicroPython.
Let's play with MicroPython on an ESP using Jupyter Notebook. Getting data from sensors and taking action in a physical world.
Customised solar-powered & sensor-controlled guard lights to brighten up my apartment balcony that somehow does not have any lights fitted.
They claim umbrellas own the ability to prevent from UV. We would like to know the fact and measure the UV value under umbrellas.
Millions of gallons of water are wasted every year. Learn to conserve water with this project!
The time has come to automate our good old fire alarms and make them part of an interconnected world.
Want to learn how to trigger events when a known Bluetooth device is nearby using the BBGW? Here's a python example to get you started!
I have this mower that I made from a BBG, Motor Bridge Cape, and there is no engine (YET)!
This article should provide basic instructions to setup AWS IoT Thing and NodeJS client on BeagleBone
Bring a building-sized digital clock to life using 129,600 independent RGB LEDs controlled by 72 BeagleBone Greens.
Management system for rental cottage.
It's a simple tutorial (step by step) for configure the LinkIt Duo as Station Mode, over a WPA Wireless Network
Because Linkit 7688 has only 32MB flash, insert an SD card in Linkit 7688 to expand the memory and use it to store data.
IoT is here to stay! But without a reliable Internet connection, everything is ruined, isn't it? Use this project to check it out!
Let's be honest, there have been times where you forgot to give your dog water, so let's use a LinkIt Duo to fix that problem.
This is a project that shows you how to make cool lights to show off a building prototype.
In this video, we will see the specs of the module, configure using the web interface, and access the terminal using SSH.
Tutorial for programming the Linkit Smart 7688 Duo.
If you're fed up of storage devices occupying my USB ports, just put on your Maker cap and build this project.
Or connect with your social account:
New here? Create an account