This is a web enabled PM2.5 monitor designed to be cheap and easy to build.
A musical cup that plays "Twinkle Twinkle Little Star" upon pressing a button. Now, it plays "Happy Birthday to You" tune too.
How to get started connecting a button to the GrovePi using Windows IoT, the Raspberry Pi, and the GrovePi.
The Raspberry Pi is a great little board and packs a lot of punch. Many times you just need a small display to show some info, here's how.
Display tweets with a certain hashtag on a led matrix in real time!
Perform limited autonomous navigation and plot a 2D map of the environment.
Building your own silicone molded vibrator becomes now easier.
Light up an LED anywhere in the world if a certain device comes on your home network.
TiWo, keepin' it cool
This is a modular Xadow system, can be used as a wearable to track GPS position and orientation, ideally used during a photography session.
Automating a distress signal in the case of an emergency
BBBmini is a state of the art Linux autopilot / flightcontroller Cape for the BeagleBone. It can be used for Copter, Planes or Rovers.
A completely autonomous way to monitor a location's temperature and humidity, whether a light is on, and if motion was detected.
This is a great weekend IoT project which uses the BeagleBone Green to display Temperature Humidity inside and outside your home and more..
An Internet connected device that controls servos and sends sensor (GPS/gyro/accel/compass) updates in real time over a GSM cell link.
Amazon Alexa like device running on the Beaglebone.
A classic toaster reflow oven built around the BeagleBone green. This oven is easy to tweak due to the Python based contoller with Web UI.
A Mindless Housekeeping Bot that will Spray Water, Wipe the Floor & Move - controlled by PSoC 4 UBD based Hardware without MCU intervention
A classroom, in winter times is ill ventilated leading to poor air quality causing fatigue, headaches and in some instances nausea.
Simple application for analogue signals (audio) on the AVR Arduino platform, demonstrating the Goldilocks Analogue (1284p UNO Compatible).
This is good starting project for people interested in Internet of Things devices and wishing to start with something both simple and fun.
Use your Crazyflie 2.0 to control a Skeleton bot
Foton is a special lightsaber, which can monitor temperature and humidity of a room, detect movements, and send those data to a smartphone.
Or connect with your social account:
New here? Create an account