Multipurpose dispenser made from components of water purifier, scrap & hardware to use either soap+water or sanitiser dispensing
Using YL-69/HL-69 sensor with the Bolt Wi-Fi Module to read the moisture of soil and send an SMS alert crossing threshold value.
This esp controlled system can take data from the surroundings and send it in real time to a webpage.
In order to avoid bacterial and virus transmission when using public dispenser, I made the simplest automatic non-contact switch on Arduino.
Using Kemet SS-430 to count push up.
Made your own iBeacon and track it with a Raspberry Pi as a beacon scanner!
A simple low cost tool to get analog/digital value of your Grove sensor in seconds, no PC and coding required, quick and straight.
A gesture control vehicle made by Seeedstudio Skeleton Bot - 4WD Hercules Mobile Robotic Platform. Having a lot of fun.
Retrieves air moisture, temperature, detects the presence of the queen bee, and also gives the weight of the bee hive.
We are using some simple cost effective materials to make an IoT based air pollution monitoring system.
Grove - Base Shield is the new version of Electronic Brick Shield.
Do you often forget to drink water when you are busy? Welcome to try our drink reminder water bottle.
Make your fridge smart with a few sensors and actuators.
This is plug and play: particulate matter (PM2.5) and volatile organic compounds (VOC) plus air pressure, temp and humidity.
Build a weather station with Arduino & ASP.NET Core.
The air pollution problem attracts more and more attention. This time we tried to monitoring PM2.5 with Wio LTE and new Laser PM2.5 Sensor.
Sample Arduino Uno R3 & Seeeduino V4.2 clients for my Windows 10 IoT Core on RPI based LoRa field gateways.
A sample Wilderness Labs Netduino 433/868/915MHz .Net MicroFramework client for my Windows 10 IoT Core on RPI based LoRa field gateways.
A sample MakerFabs Maduino 433/868/915MHz client for my Windows 10 IoT Core on RPI based LoRa field gateways.
A sample Arduino Nano client for my Windows 10 IoT Core on RPI based LoRa field gateways.
A sample Arduino MKR WAN 1300 client for my Windows 10 IoT Core on RPi based LoRa field gateways.
The communication of temperature measurements between two Particle Photons using a temperature sensor as the detection device.
Our device serves a multipurpose motion sensor that will allow you to remain confident in your belongings whereabouts
Shows how to use the Ubidots platform with the particle board by monitoring the temperature humidity and air quality of a room!