Objectives: Heating, aeration, and irrigation. Behavior: Event when the temperature is low or high and the soil is dry. (Videos on Story)
The Green Box is an automated hydroponics system.
We want to notify parents with an email on their smartphone if their children have brushed their teeth. We are using an acceleration sensor.
Have you even forgotten to feed yout pet? Things can happen... But not anymore! From now on PetFeeder will buzz, blink and message you!
Interactive snake enclosure that is temperature and humidity controlled and uses lat-long to mimic natural light cycles, with an online cam.
A classroom, in winter times is ill ventilated leading to poor air quality causing fatigue, headaches and in some instances nausea.
An example weather monitoring station to show how easy it is to connect a MSP430 LaunchPad to WiFi for ~$20 total!
A humanoid robot with 17DOF, controlled by Android. Multi-terrain walking style and fall detection.
PRUADC1 - Beaglebone Green and PRU "Programmable Real-Time Unit" Interface to ADC using RemoteProc and RPMsg Framework.
This project brings a pre-IoT audio receiver up to speed using Blynk and a TI Launchpad to send IR signals through WiFi from an iPhone.
Can a wooden block, wrapped in LED strips be turned into Rubik's cube?
This robot can recognize, track, and follow a specified color object as well as have the ability to avoid obstacles in its way.
Everybody here loves binary clocks. So do I, so I made one for myself.
To prevent energy loss in larger buildings, we created aLUXander: an assistant to keep track of unnecessary artificial lighting.
Automated environment for reptiles to promote good husbandry and enable maximum lifespan for animals in captivity.
I found this hand puppet on Etsy and thought it would make a good companion, so I built it into a robot to control it over the internet.
Meet Bert, a bipedal walking monster robot.
In this new project we will present our GPS Tracker connected using the GPRS technique and MQTT protocol.
A new application for The Tactigon, this time combined with Raspberry Pi to achieve a futuristic lights control!
Ping me to water my basil plant when the soil moisture gets too low.
This is first edition project made using LinkIt One. The final outcome will be a portable device showing air quality on web.
This is a simple weather station that can measure PM 1.0, PM 2.5, PM 10.0, CO2, TVOC, humidity, pressure, and temperature.
Setting up a LoRa peer-2-peer communication by using CY8CKIT-062-BLE with Arduino Shield (Dragino LoRa, RFM95W).
Take photos whenever your heart races! Accessorize with a clip on earring pulse detector and camera wreath. LinkIt & Microsoft Azure.