The smart tunnel prevents further outspread of COVID-19 / SARS-CoV-2. It can disinfect a person fully in a time span of just 15 seconds.
An Internet-controlled robot that can cut the grass of a garden area with ease and efficiently.
Always wanted a cow, but don't have the space? Build yourself this Roomba-sized cow!
Employ a robot to take care of your floor cleaning jobs.
Sanitation station for hands and shoes, the procedure detects if the person is wearing a mask on their face, to avoid the spread of COVID-19
Replacement for broken mechanical timer of a washing machine with electronic timer.
A simple device that makes controlling humidity and saving energy a snap. Operates as easily as a thermostat.
You can easily control light, fan, and other home appliances with the voice commands using the NodeMCU and Relay module.
Ever feel the need to punch the world in its face? Now you can!
How to make IoT based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the manual switch & smartphone.
In Manual Mode, control the relay module from Touch Switch & Blynk App. In Auto Mode, DHT11 & LDR will control the Relays Automatically.
Control your home appliance through Alexa using just ESP8266 or ESP32 for under $5. Voice-activated smart appliances!
Monitor your sleep and meditation using smart gloves and IOT application.
In this IoT project, I have shown how to make IoT based Smart Home Automation using Amazon Alexa & ESP32 to control 8 home appliances.
Turn on/off your fan without getting up, just by using an IR remote.
When life gives you hot flashes, use them to burn calories. This one is for the ladies.
Ultraviolet disinfection remote controlled robot with automatic human detection and collision avoidance.
App and Voice control home-automation along with auto-temperature regulation which saves electricity, money and your health.
Let’s learn how to use a touch switch with a single relay or relay channel to control the relays. So that we can drive high voltage appliance
Multipurpose dispenser made from components of water purifier, scrap & hardware to use either soap+water or sanitiser dispensing
Have you ever wanted to control a linear actuator with sensors? Well, we did, and we used the actuator to control a light switch.
Control all your home appliances using mobile app over Internet. The following project uses Bolt WiFi module and a relay.
MQTT-driven IP-relay module, on which the variable part of the MQTT broker’s IP address is set by mechanical switches.