This simple yet sophisticated project is ideal for weather stations as this Grove dust sensor provides accurate data, alongside an Arduino.
A simple guide for getting to know your Seeeduino v4.2 better, and to prepare your board for use with the Arduino interfaces.
It is an alert system which alert you in period of gas leakage, fire and high temperature.
This project helps us to detect the leakage and presence of butane gas in the area arround the divice!
This is a simple example demonstrating how to read GPIO from Microsoft Azure Sphere.
The goal of this tutorial is to enable you to capture and send data to cloud from NodeMCU.
Send and receive Machine to Machine Commands using TwilioIoT, Arduino IDE and the Seeed Studio Wio LTE.
Become a pioneer of NB-IoT by sending commands over T-Mobile's network with Twilio's Alfa Developer Kit.
Create a cool watch with Arduino.
Using Wemos D1, GSM module, MQ5/MQ6 sensor and IoT platform (ThingsIO.AI). Here it will give message on your phone also when fire detected.
An extremely straightforward project involving a digital PIR sensor, which can be utilised for many security and home automation uses.
A relay is an electromagnetic switch which can be controlled to switch High Power devices.
Read an I2C temperature and humidity sensor with the MT3620 Grove Shield.
Join me as I unbox the Azure Sphere MT3620 Development Kit, set it up, press a button, and blink an LED!
Remotely operated unmanned ground vehicle for detecting the toxic gases which is helpful for firefighters and researchers.
Drive some geared, DC motors via 12vDC lead acid battery w/ the BBGW, Sabertooth 2 x 12, and a Motor Bridge Cape attached!
We'll look at how to control a simple tracked rover using Euler's angles. The remote controller can be put in a glove and become wearable!
The image extraction is based on a novel algorithm which effectively works with the encoding system of the robot movement.
Make your projects colorful.
The Banana Pi R64 is a router-based development board, which can run on a variety of open source operating systems including OpenWrt, Linux.
A smart OLED-based identity card.
Want to learn how to trigger events when a known Bluetooth device is nearby using the BBGW? Here's a python example to get you started!
Beaglebone Green PRU PID motor speed control project.
It's a simple tutorial (step by step) for configure the LinkIt Duo as Station Mode, over a WPA Wireless Network
Or connect with your social account:
New here? Create an account