In order to avoid bacterial and virus transmission when using public dispenser, I made the simplest automatic non-contact switch on Arduino.
A coronavirus detector based on Seeed Studio Grove - MLX90615 Digital Infrared Temperature Sensor. Hope this guide will help you to find a
Is there an instant in which you want time to go backwards? Look closely at the water droplet. Is it dripping down or going up?
A simple low cost tool to get analog/digital value of your Grove sensor in seconds, no PC and coding required, quick and straight.
Automatically detect when a hot flash is occurring and turn on a fan in response, as well as log it.
I was wondering if I could make a futuristic and comfortable mask in this legendary punk cyber in 2020.
This is a little demo with Seeeduino XIAO - Arduino microcontroller. The demo uses 4 modules. 2 sensors, 1 switch, and 1 OLED display.
The Idea is to control both Direction+Acceleration of a Bluetooth Robotic Car with the movement of Forearm using Kinetis K82 Freedom board.
A less than 10$ distraction-less, augmented reality development kit which allows you to experiment with both the software and hardware.
This is a modular Xadow system, can be used as a wearable to track GPS position and orientation, ideally used during a photography session.
WEAR is an open source low cost smart wearable device to ensure safety of women by giving the caregivers security alerts.
I set up this project with the sole intention of determining the cost in milliseconds of the MPU9150's standard functions.
Nowadays there are many wearables in the market for different purposes, so why not we make one for babies?
Disruptive wearable technology designed to seamlessly locate and direct you to NYC's finest pizza.
An IoT solution to hack drifting. Gameification built around proximity sensors. Leaderboards by location. Drift into the Future!
Light up the dance floor!
Hey guys! Here is a new tutorial to teach you how to make a digital clock based on the LIXIE display technology using an Arduino board.
A Bluetooth-enabled glove that encodes finger movement into MIDI signals and a Python GUI that creates a virtual MIDI port for synthesizers.
Using the Grove Serial Camera with Mediatek Labs Linkit ONE.
Sometimes we need to send pets with parcel services. How can we be sure they're fine at all times? Take into consideration how baggage.
Made a WiFi-based watch with notification server and YouTube API.
We made few upgrades to our previus project. Now, we can move the robot arms using two T-Skin.
A smart OLED-based identity card.
We use The Tactigon Skin (T-Skin) to control our tracked rover by moving our hand!The rover robot is Arduino base robot with BLE